New Machines Available From Stock

SUNMASTER BHL1550 Gap Bed Centre Lathe
Height of Centres 190 mm
Swing over bed 387 mm
Swing in Gap 610 mm
Swing over cross slide 238 mm
Distance between centres 1250 mm
Spindle bore 56 mm
More Information

Durma Model SB3006NT
Swing Beam Hydraulic Shear Cap. 3M x 6mm
With: NC Control, Squaring Arm and Sheet Suppport Arms
Durma (Birlik) Model
MDK Circle Cutting Machine

Cap. 1000 x 2 mm
Sunrise Model IW45M
Hydraulic Ironworker

Cap. 45 Ton
Punching 22 Ø x 15 mm 40 Ø X 8 mm
Flat bar 350 x 8 mm Angle 80 x 80 x 8 mm
Round bar 25 mm Ø
Square bar 25 x 25 mm
Available in 3 Phase and Single Phase
Sunrise Model IW45K (With Notching Station)
Hydraulic Ironworker

Cap. 45 Ton
Punching 22 Ø x 15 mm 40 Ø X 8 mm
Flat bar 300 x 10 mm Angle 75 x 75 x 6 mm
Round bar 30 mm Ø
Square bar 25 x 25 mm
Notching 50.8 x 90 x 7 mm
Sunrise Model IW60H
Hydraulic Ironworker

Cap. 60 Ton
Punching 28 Ø x 15 mm 40 Ø x 11 mm
Flat bar 350 x 20 mm Angle 100 x 100 x 13 mm
Round bar 40 mm Ø
Square bar 38 x 38 mm
Notching 50.8 x 90 x 8 mm
Sunrise Model IW60S (Double Cylinder)
Hydraulic Ironworker

Cap. 60 Ton
Punching 22 Ø x 20 mm 50 Ø x 9 mm
Flat bar 350 x 15 mm Angle 130 x 130 x 13 mm
Round bar 40 mm Ø
Square bar 38 x 38 mm
Notching 50.8 x 90 x 9 mm
Sunrise Model IW100S (Double Cylinder)
Hydraulic Ironworker

Cap. 1000 Ton
Punching 28 Ø x 26 mm 50 Ø x 15 mm
Flat bar 610 x 20 mm Angle 152 x 152 x 15 mm
Round bar 45 mm Ø
Square bar 45 x 45 mm
Notching 50.8 x 90 x 9 mm
Bomar Model 320.250DG
Double Mitre Cutting Bandsaw

Cap. Round 250 mm
Rect. 320 x 170 mm / 290 x 240 mm
Square 240 x 240 mm Mitre 60° Left and Right
Bomar Model 410.260DG
Double Mitre Cutting Bandsaw

Cap. Round 275 mm
Rect. 415 x 2400 mm / 180 x 275 mm
Square 270 x 270 mm Mitre 60° Left and Right
Arboga Model A2608
Pedestal Drilling Machine

Cap. 25 mm
Morse Taper 3 MT
Speeds (8) 105 – 2900 rpm
Motor 0.9 kW Weight 180 kg